Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Antioch Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Antioch: repair, replacement and installation of Mr-Glass shower enclosures, windows, patio doors and custom glass, done by technicians who work on these products regularly. What sets our Mr-Glass work apart is diagnosis first. We figure out whether the glass, the hardware or the seal has actually failed before anyone quotes a replacement, because in Antioch’s housing stock the answer is often a hinge or a seal rather than a whole new unit.
Construction Antioch is an independent Mr-Glass service provider. We are not affiliated with, authorized by or endorsed by Mr-Glass, and we don’t sell their products as a dealer. Our knowledge comes from hands-on work with these products across the city, from the older single-story homes near the river to the stucco two-stories on the east side and Hillcrest. Call (866) 811-9694 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Antioch for Your Mr-Glass Construction?
Mr-Glass products reward familiarity. A ShowerGuard frameless enclosure, a 3000 Series patio door and a 500 Series window each fail in their own way, and the fix depends on which component gave out. Our technicians have up to 13 years of experience with glass and glazing work, which means they’ve seen coated shower glass etch, dual-pane seals fog, and patio door rollers flatten out enough times to recognize the pattern in a few minutes rather than after a replacement order.
We use quality parts that fit Mr-Glass equipment. For critical components – shower door hinges, window seals, structural hardware – we fit parts made to the same specifications so the unit closes, seals and drains the way it was built to. That matters for warranty safety too. A repair done with hardware that doesn’t match the original fit can stress the frame or the glass edge, and that’s exactly the kind of stress that causes the next failure. We keep the work within what the product is designed for.
You’ll get a written, line-item estimate before anything starts, and the estimate sets the price. No change orders halfway through a shower rebuild. If a job needs a permit, we pull it and see the inspection through. That’s the standard we hold on every Mr-Glass job in Antioch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Antioch
Here’s what we actually get called out for on Mr-Glass products. Most of it traces back to one of five causes.
- ShowerGuard coating breakdown. The protective layer on ShowerGuard glass wears away after years of cleaning with abrasive pads or harsh bathroom sprays. Once it’s gone, hard water leaves spotting that won’t wipe off and the surface starts to etch. Antioch’s water runs hard, so this shows up faster here than owners expect. The fix is either a careful assessment of how much coating remains or replacement of the panel.
- Failing shower door hinges. Frameless enclosures hang all their weight on the hinges. Over time they loosen, sag, and the door stops lining up with the frame. A sagging door then drags on the seal and starts leaking. Replacing the hinges restores the alignment and usually solves the leak at the same time.
- Worn door seals. The clear sweep and jamb seals that keep water inside the shower harden and shrink with age. Water escapes at the bottom corner or along the hinge side. It’s the most common leak we see, and the cheapest to correct.
- Dual-pane seal failure. On Mr-Glass 500 Series windows, the seal between the panes can break down. Moisture gets in and the window fogs between the glass. Antioch’s summer swings past 100°F and the delta breeze cools things off at night, and that daily expansion and contraction works the seal. Fogging that won’t clear is the sign.
- Patio door rollers and tracks. Mr-Glass 3000 Series patio doors get hard to slide when the rollers wear flat or the track fills with grit and grit grinds the wheels down. Owners often assume the whole door needs replacing. Usually it’s the rollers.
One pattern we see a lot: a homeowner notices water leaking from the shower door and spots mineral buildup on the glass. The usual cause is a worn door seal plus a ShowerGuard coating that’s been degraded by improper cleaning. A qualified local pro typically assesses the glass and hardware, replaces the seal, and if the coating is compromised, may recommend replacing that glass panel with a new ShowerGuard-coated unit so the shower cleans easily and stops leaking.
Mr-Glass Parts & Our Repair-vs-Replace Approach
Parts choice drives how long a repair lasts. For critical components – shower door hinges, window seals – we use OEM Mr-Glass parts so the fit and function match what the unit was built around. For items like patio door rollers and generic seals, a high-quality aftermarket part can do the same job at a lower cost, and we’ll tell you when that’s the sensible call.
Repair wins when the frame and glass are sound. A hinge swap, a new seal or fresh rollers brings a good unit back to full service for a fraction of replacement. Replacement makes more sense on older units with several failures at once, or when the glass itself is etched or fogged beyond saving. We’ll give you both numbers in the written estimate so you can decide. Call (866) 811-9694 to talk through which way your unit is leaning. Estimates are free.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We look at the glass, hardware and seals together and identify the actual failure – not the symptom. On a leaking shower that means checking hinge alignment, seal condition and coating integrity, not just caulking the corner and leaving.
- 2
Repair or install. Once you approve the written estimate, we carry out the repair or install the new unit. Critical hardware is fitted to specification so the frame isn’t stressed and the door sits true.
- 3
Test. Every shower enclosure gets a live water test before we leave. Patio doors get cycled open and closed to confirm the rollers track clean. Windows get checked for seal and operation.
- 4
Warranty. We stand behind the workmanship on our installation and repair. We’ll walk you through what’s covered in writing before we start, so there are no surprises later.
Mr-Glass Products We Service & Install in Antioch
We handle the Mr-Glass products that show up most in Antioch homes. Frameless glass shower enclosures get repair, rehang and full replacement. Walk-in shower installations are a regular request, especially on bathroom remodels where the old tub comes out and a curbless or low-curb glass enclosure goes in. Shower replacements cover the case where the glass is etched or fogged and a new enclosure is the smarter spend. Separately, we service Mr-Glass 500 Series windows for seal and hardware issues, Mr-Glass 3000 Series patio doors for rollers and tracks, and Mr-Glass custom mirror and glass products for repair and reinstallation. We don’t stock products; we service what’s in your home.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Mr-Glass is one line among many we work with. If your project touches a bathroom, kitchen or window wall, we also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That breadth means one contractor can handle the shower enclosure and the vanity it sits next to, with materials named up front so you can check them yourself.
Typical Mr-Glass Construction Costs in Antioch
What you’ll pay depends on the scope: a seal and hinge repair is a small line item, while a new enclosure is a bigger one. Here are the typical estimated ranges for the Mr-Glass-adjacent work we do most in Antioch. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Where a Mr-Glass enclosure sits inside a larger bathroom remodel, the full bathroom range in Antioch typically runs $9,000 – $28,000, with smaller bathrooms in the $5,000 – $12,000 range. Call (866) 811-9694 for an exact quote on your unit.
FAQs – Mr-Glass Construction Service in Antioch
No. We are an independent Mr-Glass service provider, not affiliated with, authorized by or endorsed by Mr-Glass. We don’t act as a Mr-Glass dealer. Our expertise comes from hands-on work with these products, not from manufacturer authorization. Call (866) 811-9694 to book a free estimate.
Yes. A leaking or misaligned Mr-Glass shower door is usually a hinge or seal problem, and both are repairable. We check whether the hinges have sagged and thrown the door out of alignment, and whether the seals have hardened and pulled away. Most of these fixes are done in a single visit. Call (866) 811-9694 to schedule yours.
Yes. We use OEM Mr-Glass parts for critical components like shower door hinges and window seals so the fit is right, and high-quality aftermarket parts for items like rollers and generic seals where they do the job for less. Every part we fit is chosen to match the unit, not to be the cheapest thing on the shelf.
A shower replacement in Antioch typically runs $3,000 – $8,500, while a full walk-in shower installation ranges from $4,500 to $12,000 and a tub-to-shower conversion from $3,500 to $10,000. The written estimate sets the final price. Call (866) 811-9694 for an exact quote. Estimates are free.
Fogging or condensation between the panes that never clears is the sign. When the seal between the panes fails, moisture gets in and can’t get out, so the window stays cloudy no matter the weather. It’s distinct from surface condensation, which wipes away. If yours stays fogged, call (866) 811-9694 and we’ll take a look.
Yes, when they’re cared for properly. ShowerGuard coating makes glass easier to clean and resists spotting, which is a real benefit in Antioch’s hard water. The coating is what fails if you clean with abrasive pads or harsh sprays, so the investment holds up if you use a soft cloth and a mild cleaner. If the coating is already compromised, we can assess and advise whether repair or replacement is the better spend.
Yes. Frameless glass works well in small bathrooms because it opens up the space visually and doesn’t add a frame to close off the room. We measure the opening, account for the plumbing wall and any slope, and install to fit. A small bathroom remodel in Antioch typically runs $5,000 – $12,000, with walk-in shower installation from $4,500 to $12,000. Call (866) 811-9694 for a free estimate.
Most repairs – hinges, seals, rollers – are completed in a single visit. A full enclosure replacement or window replacement takes longer, usually scheduled across a defined window that we confirm in the written estimate. We don’t quote timelines we can’t back, so you’ll know the schedule before work starts.
Book Your Mr-Glass Service in Antioch, CA
Whether it’s a leaking frameless shower, a fogged 500 Series window or a full enclosure replacement, we’ll diagnose the failure and give you a written estimate before anything starts. We work on Mr-Glass products with quality parts that fit them, and we keep the project within the scope you approve. Call (866) 811-9694 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Antioch.