Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Antioch Homeowners Choose Delta Construction
Construction Antioch provides independent Delta construction, repair and service in Antioch, CA, working with Delta shower valves and faucets every week and knowing where they actually fail. We’re not affiliated with or authorized by Delta. What sets our Delta work apart is the combination: correct rebuild kits for the exact valve series installed in your wall, plus the remodel scope to open a wall, replace tile and reset trim properly when a repair goes beyond the fixture. Our technicians have up to 13 years of experience on jobs like this.
Antioch is a Delta-edge city, and that shapes the work in ways an inland contractor won’t anticipate. Much of the buildable land here sits on or near fill and alluvium along the San Joaquin River and the Delta sloughs. Finished floors move, walls crack, and a valve rough-in that was set years ago can sit slightly out of plumb with the tile around it after seasonal soil movement. Add hard water from the local supply and you get fixtures that scale up fast. Call (866) 811-9694 for a free estimate.
Why Trust Construction Antioch for Your Delta Construction?
Our technicians know the Delta valve families by sight and by feel. Monitor 14 Series tub/shower and shower-only valves, Monitor 17 Series with separate temperature and volume handles, Classic and Foundations single-handle faucets, and the Lahara and Addison widespread bathroom faucet collections all come apart differently. We read Delta’s rebuild kits and finish codes correctly so a repair matches what’s actually installed in your wall, not what the last person guessed.
We use genuine Delta repair parts when a rebuild is the right call: OEM cartridges, ball assemblies, seats and springs, and the correct RP-number rebuild kits for the series. Aftermarket cartridges are the leading cause of repeat shower-valve callbacks, and we won’t put one in your wall to save a few dollars. That matters for warranty-safe service too. When parts fit the valve body and installation follows the manufacturer’s method, you’re protecting the warranty rather than chipping away at it.
We’re an independent service provider, not a Delta dealer and not factory-trained or certified by Delta. What we bring is regular hands-on work with these fixtures plus the breadth to handle the surrounding remodel: the vanity, the tile, the walk-in shower conversion, the trim finish you actually want. One contractor, every project. Estimates are free and every price is set per job by a written estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in Antioch
Delta fixtures are reliable, but they fail in recognizable ways. Knowing the pattern is most of the diagnosis. Here’s what we run into most often in Antioch homes:
- Monitor 13/14/17 Series valves that run cold or only lukewarm. This is usually a worn pressure-balance spool or a rotational limit stop that was set wrong or has drifted, and the cartridge gets blamed first. Pulling the handle and trim to inspect the spool and confirm the limit-stop setting is the only way to know which part is actually at fault.
- A drip at the spout on single- and two-handle Delta faucets. On these, water at the spout usually traces to a scored ball assembly, worn seats and springs, or a hardened cam gasket. The whole faucet rarely needs replacing. A model-matched rebuild kit is the standard fix, and full replacement is reserved for bodies that are pitted or cracked.
- Leaks behind the wall at Delta tub/shower valve rough-ins. These show up as staining on the room side of the tile, weeks or months after installation. The usual cause is a plaster guard left in place or a bonnet nut that was under-tightened. It’s a slow, stubborn leak that gets worse with temperature swings.
- Finish wear and pitting on spot-resistant stainless and champagne bronze kitchen faucets in hard-water households. Antioch’s water leaves mineral deposits on these finishes quickly, and pitting accelerates once the surface is compromised. Pull-down spray heads also lose flow when the diverter or aerator screen clogs with scale.
- Expansive-soil movement loosening the trim and valve alignment. Delta-edge soils shift season to season, and that movement can throw a valve body slightly out of alignment with its tile or trim over time. It’s not a Delta defect, but it does affect how a repair gets finished and reset.
Delta Parts & Our Repair-vs-Replace Approach
Parts availability is straightforward. We source genuine Delta repair parts when a rebuild is the right call: OEM cartridges, ball assemblies, seats and springs, and the correct rebuild kits matched to the valve series. We don’t stock or carry OEM Delta parts, and we’re not a Delta dealer. We order the correct parts that fit your fixture, confirm the model from the trim or under the sink before ordering, and install only what’s matched to the series in your wall.
The repair-or-replace decision comes down to the valve body. If it’s sound, we rebuild it. We replace the fixture only when the body is cracked, the finish is failing, or the model is discontinued. That honest line is worth more than an upsell, and homeowners notice the difference when the estimate arrives. Call (866) 811-9694 and we’ll walk through what’s on your wall and what a repair typically involves.
Our Delta Service Process – Step by Step
Every Delta job follows the same sequence, whether it’s a single shower valve or a full bathroom remodel that touches one.
- 1
Diagnose. We identify the exact series from the trim, pull the handle and trim to inspect the pressure-balance spool, rotational limit stop, ball assembly or cartridge, and confirm the model number before ordering anything.
- 2
Repair or install. For a rebuild, we install the correct OEM rebuild kit for that series. For a remodel that involves the valve, we handle the rough-in, tile and trim as one scope, with the correct parts and finishes matched to what’s specified.
- 3
Test. We pressure-test the repair, run hot and cold, and confirm the flow and the limit stop before closing the wall or resetting tile. No guesswork at close-out.
- 4
Warranty-safe close-out. We leave the job with parts and installation documented and the fixture behaving as it should, so the Delta warranty and the work we did both hold up.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Antioch
We work on the Delta fixtures that live in Antioch bathrooms and kitchens: Monitor 14 Series tub/shower and shower-only valves, Monitor 17 Series with separate temperature and volume handles, Classic and Foundations single-handle kitchen and lavatory faucets, and the Lahara and Addison widespread bathroom faucet collections. That includes cartridge and rebuild-kit replacement on shower valves, ball-assembly and seat-and-spring repair on single-handle faucets, finish and aerator issues on kitchen faucets, and valve rough-in work during a bathroom remodel.
We’re an independent service provider and not a Delta dealer. We work with the fixtures you have and correct quality parts that fit them. If you’re converting a tub to a shower, replacing a shower valve, or installing a new vanity and need the plumbing lined up with the tile and trim, we handle the whole scope under one estimate.
We Also Service These Brands
Delta is one part of the picture. We also work with KraftMaid cabinetry, Cambria, Silestone and Kohler fixtures, so a bathroom or kitchen project can be planned around matching brands you already trust rather than being forced into one line. If your remodel pairs a Delta valve with a Kohler sink and a Cambria countertop, we coordinate the fit and the schedule together. One contractor, one point of contact.
FAQs – Delta Construction Service in Antioch
Is Construction Antioch authorized by Delta? No. We’re an independent service provider. We’re not a Delta dealer, not factory-trained, and not certified by the manufacturer. That independence is deliberate: we work on your Delta fixtures, source correct quality parts that fit them, and give you an honest repair-or-replace call.
Do you use quality parts that fit Delta equipment? Yes. We use genuine Delta repair parts when a rebuild is the right call, including OEM cartridges, ball assemblies, seats and springs, and the correct RP-number rebuild kits for the series. Aftermarket cartridges are the leading cause of repeat shower-valve callbacks, so we don’t cut that corner.
How long does Delta service take? Typical Delta service on a single shower valve or faucet takes a few hours: diagnosis, rebuild, pressure-test and reset. If the job includes wall opening, tile work or a full bathroom remodel, the schedule stretches to the full project scope, and the written estimate sets what’s planned.
What kinds of Delta products do you cover? Monitor 14 Series tub/shower and shower-only valves, Monitor 17 Series with separate temperature and volume handles, Classic and Foundations single-handle kitchen and lavatory faucets, and Lahara and Addison widespread bathroom faucet collections. We handle cartridge and rebuild-kit work, ball-assembly and seat-and-spring repair, and valve rough-in during remodels.
Will service void my Delta warranty? Not if it’s done correctly. Using genuine parts that fit the valve body and following the manufacturer’s installation method keeps the warranty intact. Incorrect parts or a rushed installation is what creates a problem. Call (866) 811-9694 and we’ll confirm what your fixture needs before we touch it.
How much does Delta construction cost in Antioch? Delta work is priced as part of the bathroom or kitchen scope. Typical estimated ranges for the projects that usually touch a Delta fixture are below, and the written estimate sets the final price.
| Project | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (866) 811-9694 for an exact quote. Estimates are free.
Book Your Delta Service in Antioch, CA
Whether your Monitor 17 Series valve runs cold, your kitchen faucet drips at the spout, or your Antioch remodel needs the valve, tile and vanity coordinated in one scope, we can help. Call (866) 811-9694. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and every price is set per job by a written estimate.
Written by the team at Construction Antioch.