Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Antioch Homeowners Choose CWS Construction
We provide independent CWS construction service in Antioch, CA – installing, repairing, refacing and remodeling CWS cabinetry and countertop systems in homes across the city. What sets our CWS work apart is that we treat those products as construction elements, not showroom boxes: we check the frames, the slab seams, the door alignment and the wall behind the cabinet before we quote anything. Construction Antioch is an independent contractor and is not affiliated with, authorized by, or endorsed by CWS; we simply work on the products every week.
That independence is the point. We aren’t selling you a factory catalog. We’re telling you what your CWS kitchen actually needs and what it will cost. Call (866) 811-9694 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Antioch for Your CWS Construction?
Our technicians have up to 13 years of experience with CWS cabinetry and countertop systems, and they’ve learned these products by taking them apart, not by reading a brochure. CWS all-wood framed and full-overlay boxes fail in predictable ways, and once you’ve seen a few hundred of those failures you stop guessing. You know which hinge has backed out, which door has swollen at the stile, and which countertop seam was never bonded correctly in the first place.
We fit CWS equipment with quality parts that match the product – hinges, drawer slides, door profiles, and quartz or granite that meets the original specification. Parts choice is where CWS work gets mishandled most often. A generic hinge on a full-overlay door throws the reveal off by a sixteenth, and suddenly every door in the run looks slightly off. We check fit before we install, and we keep the service warranty-safe: no cutting into a cabinet box to force a fit, no adhesive that can’t be cleaned out later if the seam needs to be re-done.
We also tell you when repair is the honest answer and when it isn’t. That conversation is worth more than a pitch. Our technicians have up to 13 years of experience, and they’ve had it in Antioch kitchens, not just in a training room.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Antioch
CWS cabinetry and surfaces fail in specific patterns, and most of them are driven by how the product lives in an Antioch house rather than by any defect in the product itself. Here are the ones we see most.
- Full-overlay doors that swell, rub or won’t close flush. After a few seasons of East Contra Costa humidity swings, a wood-core overlay door can take on moisture and grow just enough to foul the adjacent door or the frame. Usually the door is fine; the hinge is worn or the box has racked slightly out of square. We check alignment and the frame before condemning the door.
- Painted and glazed finish chipping at the stile-and-rail joints. Every CWS painted or glazed cabinet takes repeated cleaning and daily use at the joint lines, and that’s exactly where a finish cracks first. The crack itself is cosmetic until moisture gets behind it. Once it does, the fix is a proper strip-and-repaint of the affected stile, not a touch-up pen.
- Quartz countertops showing seam separation, edge chipping or adhesion loss. A CWS quartz top that has separated at the seam was almost always under-supported at the seam or bonded into a cabinet run that has since moved. The chip at the edge is usually impact, and the adhesion loss at the slab-to-cabinet junction is usually a settling or racking problem underneath.
- Vanity and cabinet box joints that loosen. When a box racks, drawers bind and doors sag out of alignment. The cause is rarely the drawer slide; it’s the box, the floor, or the wall the cabinet was fastened to. Re-leveling the run fixes more doors than replacing hardware ever will.
- Cabinet runs that were never shimmed or leveled properly on the original install. This shows up years later as doors that won’t close flush and a countertop seam that migrates. It’s the installation, not the product, and it’s fixable without gutting the kitchen.
What ties these together: CWS products are good at what they do, but they’re built to close tolerances, and Antioch’s hot, dry summers and winter rain put real movement into any house. A cabinet run installed dead level in a mild climate can look off after a decade in a house that swings 40 degrees between August and January.
CWS Parts & Our Repair-vs-Replace Approach
For CWS cabinetry and surfaces, exact-match replacement doors, drawer boxes, hinges and slab pieces are the preferred route, because finish and profile have to match the existing system or the repair shows. Where an exact match is no longer available, we use quality aftermarket hardware and quartz or granite that meets or exceeds the original specification – the same color family, the same thickness, the same edge profile. We don’t stock OEM or genuine CWS parts and we’re not a CWS dealer. We source the right part for the product in front of us.
Repair is usually the right call for isolated door or hardware failures. It’s also right for a single compromised hinge, a separated seam, or one chipped slab edge. Full replacement makes more sense when the boxes, the frames, or the slab runs are compromised – when multiple boxes have racked, when the frame has delaminated, or when a long quartz run has failed in more than one place. We walk you through which side of that line your kitchen sits on, in plain numbers. Call (866) 811-9694 to schedule a free estimate.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We start with the cabinet frames and door alignment, not the hinges. Out of square shows up in the reveal, and a box that has racked will keep throwing doors off no matter what hardware goes on. On the countertop side, we check support at the seam and the fastening at the slab-to-cabinet junction before we touch the seam itself.
- 2
Repair or install. For repair, we replace the affected hinge, door or drawer box if the finish and profile can be matched, and we re-level the run so the CWS doors close clean. For new installation, we check the wall, floor and substrate first, shim the boxes true, and fasten the countertop with the support the slab needs. Seams get cleaned and bonded properly, edges get profiled to match.
- 3
Test. Every door gets opened and closed through its full range. Drawers get loaded and cycled. We check the reveal down the run by eye and by feel, and we check the seam for a flat joint under a straight edge. If it doesn’t close flush, it isn’t done.
- 4
Warranty and walkthrough. We leave you with the part numbers and materials used, so future service isn’t a mystery, and we walk the finished work with you before we close out. Workmanship is warranted; the product warranty sits with the manufacturer.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Antioch
We work on CWS all-wood framed and full-overlay cabinet lines, the company’s painted and glazed finish cabinet series, CWS quartz and granite countertop slabs supplied through dealer programs, and CWS semi-custom bath vanity and linen cabinet collections. That covers kitchen and bath boxes, doors, drawer boxes, hinges and slides, plus the stone and quartz tops that sit on them. For an Antioch mid-century or 1990s kitchen, this is usually the whole cabinet-and-counter package, which means we’re fixing the run and the top together rather than handing you off to a separate countertop outfit. Small CWS repairs are fine with us too – a single door, a sagging vanity, a chipped slab edge.
We Also Service These Brands
CWS is one product family among many we handle. We also service KraftMaid cabinetry, Cambria and Silestone quartz, and Kohler fixtures, so if your kitchen or bath has mixed brands – very common in Antioch homes that have been remodeled once or twice since the 1970s – we coordinate the whole job under one contractor. If a CWS door is no longer available, that wider roster is often how we match the finish.
FAQs – CWS Construction Service in Antioch
No. Construction Antioch is an independent contractor and is not affiliated with, authorized by, or endorsed by CWS. We work on CWS cabinetry and countertop systems, but we don’t sell, represent or speak for the manufacturer. If your warranty requires factory-authorized service, tell us up front and we’ll point you in the right direction.
Yes. We fit CWS equipment with parts that match the product – exact-match doors and drawer boxes where available, and quality aftermarket hardware and stone where they aren’t. We don’t stock OEM or genuine CWS parts and we don’t claim to be a dealer, but we check fit and finish before anything goes in. That’s the difference between a repair that disappears and one that reads as patched.
A single hinge, door or drawer-box repair is typically a short job; a full cabinet refacing or a kitchen remodel is measured in weeks. It depends on the scope and on whether parts need to be sourced for finish matching. We give you a real timeline on the written estimate, and the written estimate sets the price. Call (866) 811-9694 – estimates are free.
We cover CWS all-wood framed and full-overlay cabinet lines, painted and glazed finish series, quartz and granite countertop slabs, and semi-custom bath vanity and linen cabinet collections. That’s the kitchen and bath cabinetry and surface work, from a single replaced door to a full remodel.
It can if the work is done badly – cutting into the cabinet box, forcing a fit, or using a material that doesn’t meet the original spec. That’s why we keep the work warranty-safe: fit checks before installation, correct support at every countertop seam, and no modification that changes how the product is meant to perform. We tell you what we’re doing and why, and when the manufacturer should be involved instead.
Usually a combination of three things: a swollen full-overlay door, a worn hinge, or a cabinet box that has racked slightly out of square. Antioch summers push past 100°F and winter rain brings moisture back in, so wood-core doors move with the seasons. A qualified pro checks the frames and alignment first, replaces the affected hinge or door, and re-levels the run rather than shimming the door repeatedly. Call (866) 811-9694 for a free estimate.
Yes, usually. A separated seam is cleaned and re-bonded; a chipped edge is often repairable with a color-matched quartz piece or a profiled repair. Replacing the whole slab is only necessary when the run is compromised in several places or the support underneath has failed. A typical estimate for countertop work in Antioch runs $2,000 – $6,500 depending on scope, and the written estimate sets the final price. Call (866) 811-9694 for an exact quote – estimates are free.
Refacing keeps the existing CWS boxes and frames and replaces the doors, drawer fronts and veneer; replacement takes out the boxes and starts over. Refacing makes sense when the frames are sound and only the faces are tired. Replacement is the better call when boxes have racked or delaminated. A small kitchen remodel typically runs $9,000 – $20,000 in Antioch; a full remodel runs $14,000 – $45,000. The written estimate sets the price. Call (866) 811-9694 to talk it through.
Match the profile first, then the finish. A door with the wrong stile profile will always read as patched, even with a perfect color match. We source exact-match doors where available and fall back to a color-matched finish on a properly profiled door where they aren’t. In older Antioch kitchens, the finish has also aged, so a straight color match can still read slightly different under the room’s light. We check the match in the room, not on a sample chip.
Repair usually wins when the box is sound and only the door, hinge or finish has failed – that’s a much smaller spend than a replacement vanity. Replace when the box has swollen, the frame has delaminated, or you’re changing the layout anyway. A bathroom vanity installation in Antioch typically runs $800 – $3,000; a full bath remodel runs $9,000 – $28,000. The written estimate sets the final price. Call (866) 811-9694 for a free estimate.
Typical estimated ranges for the work we do around CWS cabinetry and countertops in Antioch:
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
These are estimates, and the written estimate sets the final price. Antioch’s Delta-edge soils and aging plumbing often add scope to a kitchen job that a flatland city wouldn’t see, so we price what we find after inspection. Call (866) 811-9694 for an exact quote – estimates are free.
Book Your CWS Service in Antioch, CA
If your CWS kitchen, bath or countertop is due for repair, refacing or a full remodel, start with a free estimate. We’ll check the frames, the seams and the door alignment, then put real numbers in front of you on a written line-item quote. Construction Antioch is an independent contractor, and every CWS job we do is quoted the same way. Call (866) 811-9694. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Antioch.